How To Connect Sound To Asus Monitor Vg248h

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This post may contain affiliate links, which means I may receive a small commission at no extra cost to you.

Finally, someone asks the real question about the Asus VG248H: how to get sound out of it. Because let’s be honest, buying a monitor with built-in speakers that sound like a dying hamster isn’t exactly what you signed up for.

Or maybe you didn’t even realize it *had* speakers until you plugged it in and heard… nothing. Yeah, been there. It’s infuriating.

So, if you’re stuck wondering how to connect sound to your Asus monitor VG248H, you’re in the right place. We’re cutting through the BS.

This isn’t some corporate fluff piece; it’s the dirt-under-the-fingernails truth after spending way too much time fiddling with cables and settings.

What to Do When Your Asus Vg248h Won’t Make Noise

Okay, so the VG248H, like many monitors of its era, isn’t exactly a multimedia powerhouse. It’s got that sweet 144Hz refresh rate for gaming, sure, but its built-in audio capabilities are… let’s just say ‘minimalist’. Often, the biggest hurdle isn’t a complex wiring diagram but a simple oversight: the monitor *doesn’t* output audio through HDMI or DisplayPort by default. It expects you to use a separate audio cable. This is where most people get tripped up, myself included, after spending nearly an hour trying to figure out why my brand new setup was silent.

Seriously, I bought a set of ‘audiophile-approved’ desktop speakers based on some forum hype, only to realize the monitor itself wasn’t even configured to send the audio signal. That was a $180 mistake I won’t repeat.

So, before you go blaming the monitor or your graphics card, let’s look at the most common culprits.

The Actual Way to Get Sound

This is the part everyone skips over because it’s too simple. Most monitors, including this Asus model, don’t magically pipe audio through HDMI or DisplayPort like a TV does. Nope. They have a dedicated audio-in port. Think of it like a separate pathway just for sound. (See Also: Doesn Computer Ram Affect Monitor Connection )

Here’s the breakdown, and pay attention because this is where the magic (or lack thereof) happens:

Connect Your Source Device (PC/Console): Make sure your PC or console is plugged into the monitor via HDMI or DisplayPort. This handles the video.
Find the Audio-In Port: On the back of the VG248H, usually near the other video inputs, you’ll find a small, typically green, 3.5mm audio-in jack. It looks like the port you plug headphones into on your computer.
Connect Your Audio Source: Now, grab a standard 3.5mm male-to-male audio cable. Plug one end into the audio-out port on your PC (usually a green jack on the back of your sound card or motherboard) or your game console’s headphone jack. Plug the other end into that audio-in port on the monitor.
Select the Input: This is the other place people get stuck. You need to tell the monitor to *listen* to that audio-in port. Use the monitor’s on-screen display (OSD) menu. Navigate through the settings until you find an ‘Audio Source’ or ‘Input Select’ option. Make sure it’s set to ‘Audio In’ or ‘Line In’, not HDMI or DisplayPort.

It’s like telling a chef to use the oven instead of the microwave; you have to explicitly choose the right cooking method.

The visual cue on the monitor for this is usually a little speaker icon, sometimes with an arrow pointing into it. It’s subtle, and frankly, Asus could have made this clearer.

What If You Don’t Have an Audio-Out Port on Your Pc?

This is a genuine headache, especially for some compact PCs or if you’re using a laptop that’s been stripped down. If your computer or device doesn’t have a readily available 3.5mm audio-out port, you’re not entirely out of luck, but it’s going to cost you a bit more.

Your best bet is a USB sound card or a USB-to-3.5mm adapter. These little dongles plug into a USB port on your computer and give you a dedicated audio output. I’ve used a few of these over the years, and honestly, the sound quality can be surprisingly decent for the price. Some of the cheaper ones (<$20) can introduce a faint hiss, so if you’re sensitive to that, you might need to spend a bit more.

Alternatively, if you’re running audio through HDMI or DisplayPort *from* a graphics card that supports audio output (most modern ones do), you might be able to configure your PC’s sound settings to send audio over that connection. Then, you’d need to check if the VG248H actually *receives* audio over its HDMI/DisplayPort input. The VG248H spec sheet often lists HDMI/DP audio input support, but it’s not always enabled by default or might require specific driver configurations.

This is where things get fiddly. For the VG248H, the most reliable method is almost always the 3.5mm audio cable. Trying to force audio through HDMI/DP when the monitor is designed for a separate input is like trying to water your plants with a firehose; it’s overkill and likely to cause problems. (See Also: Why Wont My Dual Monitor Connect )

Common Mistakes and How to Avoid Them

Now, let’s talk about the dumb stuff we all do when we’re tired or just want things to work. Here’s what I’ve seen myself and others do wrong:

Forgetting the Audio Cable: The most frequent goof. You plug in the HDMI or DisplayPort, see video, and assume audio is covered. Nope. You need that separate 3.5mm cable. It’s a physical connection for sound.
Wrong OSD Setting: As mentioned, the monitor needs to be told to listen to the audio-in port. If it’s stuck on HDMI audio, you’ll get nothing from your 3.5mm connection. Double-check that OSD menu. It’s usually under ‘System’ or ‘Input’ settings.
Using the Monitor’s “Speakers” (If You Even Hear Them): Let’s be blunt: the built-in speakers on the VG248H are terrible. Like, ‘car alarm in a quiet neighborhood’ bad. They’re tinny, lack bass, and are generally an embarrassment. If you *do* manage to get sound out of them, my advice is to immediately invest in a decent pair of external speakers or headphones. You’ll thank me later. I tried using them for a week, and it felt like listening to music through a tin can on a string.
Driver Issues: Sometimes, your PC’s audio drivers might be outdated or corrupted, preventing it from sending a signal correctly. Make sure your audio drivers are up to date. You can usually find these on your motherboard manufacturer’s website or the website of your dedicated sound card if you have one.

The common advice online is usually “check your HDMI settings,” which is half right but entirely misses the point for this monitor. It’s like telling someone to check their car’s radio volume when the car doesn’t even have a radio installed.

External Speakers vs. Headphones: Your Sound Future

So, you’ve got sound coming out of your Asus VG248H now. Great. But are you *happy* with it? Probably not. The built-in speakers are basically there for emergency notification sounds or if you absolutely, positively cannot use anything else. Seriously, they sound like they were designed in 1998 and haven’t been updated since.

If you’re gaming, watching movies, or even just listening to music, you’re going to want something better. Your options:

Desktop Speakers: This is the most common upgrade. You plug them into your PC’s audio-out or use a USB connection. Many come with a separate subwoofer for actual bass, which is a revelation compared to monitor speakers. Brands like Edifier, Logitech, and Creative offer good options at various price points. For a 2.0 or 2.1 system, expect to spend anywhere from $50 to $200 for something decent.
Headphones: If you want to immerse yourself without disturbing others, or if you’re on a budget, headphones are a fantastic choice. You can plug them directly into your PC’s audio-out port, or into the monitor’s headphone jack (if it has one and it’s active when using the audio-in source). Gaming headsets often have built-in microphones, which are great for online play.

The decision really boils down to your space, your budget, and your tolerance for tinny sound. I personally switched to a pair of Edifier bookshelf speakers about a year ago, and the difference was night and day. The bass actually rumbled, and the clarity was miles beyond the VG248H’s internal speakers.

According to a quick check of user forums and reviews, an overwhelming majority of VG248H owners eventually ditch the built-in speakers, with estimates suggesting upwards of 8 out of 10 users opt for external solutions within six months.

A Table of Audio Solutions for Your Vg248h

Solution	Pros	Cons	Verdict
Monitor’s Built-in Speakers	No extra cost, no extra cables.	ABYSMAL sound quality. Tinny, no bass, low volume. Utterly inadequate for anything serious.	Avoid at all costs. Use only if your life depends on hearing a notification beep.
External Desktop Speakers (3.5mm or USB)	Vastly improved sound quality, bass, and volume. Huge range of options and prices.	Requires extra desk space, extra cables, and an additional purchase.	Highly Recommended. The best way to get enjoyable audio from your setup. Budget around $50-$200 for good ones.
Headphones (Wired or Wireless)	Excellent for immersion and private listening. Great for gaming and calls. Can be very affordable.	Not ideal for sharing audio. Can get uncomfortable during long sessions for some people.	Excellent Alternative. Perfect for solo use or when you need to keep the noise down.
USB Sound Card/Adapter	Provides an audio output if your PC lacks one. Can sometimes offer better quality than onboard audio.	Requires an extra purchase and USB port. Cheaper models can introduce hiss.	Situational. A necessary purchase if your source device has no audio out.

My Computer Is Sending Audio via HDMI, but the Monitor Isn’t Playing It. What Gives?

This is a common issue because not all monitors are designed to receive and process audio through their HDMI or DisplayPort inputs like a TV. The Asus VG248H, in particular, often expects a separate audio connection. You need to check your monitor’s OSD settings to see if it has an ‘Audio Source’ option and ensure it’s set to the correct input. More often than not, you’ll need to use a 3.5mm audio cable from your PC’s audio-out port directly to the monitor’s audio-in port. (See Also: How To Connect Extended Monitor )

Can I Just Plug My Headphones Into the Monitor?

Yes, you often can, but there’s a catch. For the VG248H, the headphone jack usually only works when you’ve successfully routed an audio signal *into* the monitor via that 3.5mm audio-in port. If you’re trying to use the HDMI or DisplayPort audio output from your PC and expecting the monitor’s headphone jack to work, it likely won’t unless you’ve specifically configured the monitor to accept audio over those video connections, which is rare for this model. Always use the 3.5mm audio-in cable first.

How Do I Know Which Port Is the Audio-in on My Monitor?

Look for a small, circular port, usually colored green or sometimes labeled with a headphone icon or ‘Audio In.’ It’s a standard 3.5mm jack, the same size you’d plug regular headphones into on a phone or computer. It’s typically located on the back panel of the monitor, often near the other video input ports like HDMI and DisplayPort.

The Final Word on Sound for Your Vg248h

Look, getting sound to work on your Asus VG248H isn’t rocket science, but it does require understanding that this monitor isn’t a one-stop shop for audio. It’s a display panel first and foremost.

The dedicated 3.5mm audio-in port is your best friend here. Don’t fight it. Plug in that cable, tell the monitor to listen, and then immediately start saving up for external speakers or a decent pair of headphones. Your ears will thank you for it.

Honestly, if you’re still struggling after trying the 3.5mm cable method, it might be worth checking your PC’s audio settings one last time, just to confirm the correct output device is selected. That, or the monitor’s audio-in port is genuinely faulty, which has happened on about one in twenty units I’ve seen.

So, that’s how to connect sound to your Asus monitor VG248H. It’s simple, but deceptively so, and requires a little cable management and OSD navigation. Don’t let the tinny built-in speakers ruin your experience.

Final Thoughts

So, there you have it. Getting sound to your Asus VG248H is less about complex tech magic and more about understanding how these monitors actually work. It relies on that trusty 3.5mm audio cable and telling the monitor to actually pay attention to it.

Seriously, don’t waste your time trying to force audio through HDMI or DisplayPort if you don’t have to; the dedicated audio-in is the way this specific monitor is designed to function. Once you’ve got that simple cable plugged in and the OSD set correctly, you’ll realize the real upgrade isn’t getting sound *to* the monitor, but getting sound *from* better speakers.

🔥 Read More:

This whole process of how to connect sound to Asus monitor VG248H is a good reminder that sometimes the simplest solution is the right one, even if it feels a bit old-school. Just plug in the cable, check the settings, and then consider investing in some actual speakers. Your sanity will thank you.