How to Get Rid of Crosshair on Gameplus Monitor
Honestly, I bought my first gaming monitor on a whim, thinking the built-in crosshair was some kind of next-level feature. It wasn’t. It was a digital smudge that just got in the way, especially when I was trying to line up a headshot in Valorant. After about three weeks of frustration and missing easy kills, I finally decided to figure out how to get rid of crosshair on GamePlus monitor settings, and let me tell you, it was more complicated than it needed to be.
This whole built-in crosshair thing feels like a trick, something to make you think you’re getting more bang for your buck, but in reality, it just clutters your screen. You spend a fortune on a high-refresh-rate display, only to have a weirdly placed dot or line obscure your target. It’s like buying a sports car and then putting a giant sticker on the windshield that says ‘Look Here!’
So, if you’re like I was, staring at your GamePlus monitor and wondering why that digital reticle is still there after you thought you turned it off, you’re in the right place. I’ve been down this rabbit hole, wasted hours fiddling with menus, and even almost returned a perfectly good monitor over this very issue.
Why That Gameplus Overlay Isn’t Always Your Friend
Look, I get the appeal. GamePlus features, especially the on-screen crosshairs, sound great on paper. The idea is to give you an advantage, a constant aiming point that doesn’t rely on the game itself. When I first saw it advertised, I thought, ‘Finally, a consistent reticle that works across all my games!’ What a joke that turned out to be for my initial setup. It was a specific model, the KG271, and the crosshair was this thick, slightly blurry green cross that sat smack dab in the middle, regardless of the game’s own reticle. It was more distracting than helpful, especially during those frantic moments where every pixel counts. I spent nearly $350 on that monitor, and the most frustrating part was that the built-in crosshair was more of a hindrance than a help.
The reality is, most modern games have their own robust crosshair customization options. You can pick colors, shapes, sizes, and even dynamic behaviors that adapt to your aiming. When you layer a fixed, often poorly designed, GamePlus crosshair over that, it just creates visual noise. It’s like trying to read a book with a flashlight shining directly on the page, but the flashlight beam is also a bit wobbly and a weird color. You can’t focus. My own experience with trying to play competitive shooters like CS:GO or Overwatch with the built-in crosshair felt like I was playing with a handicap, constantly fighting against something that was supposed to be helping me.
Contrarian Opinion: Everyone talks about how GamePlus crosshairs are a ‘game-changer’ for accuracy. I fundamentally disagree. For most gamers, especially those playing titles with native crosshair settings, these built-in overlays are a distraction. They lead to tunnel vision and can actually hinder your ability to react to peripheral threats because your focus is so rigidly locked onto that single point. The common advice is to use it if it helps, but I’d argue that mastering your game’s native crosshair settings is a far more valuable skill in the long run.
Navigating the Gameplus Menu Maze
Alright, so you’ve decided that digital monstrosity has to go. Here’s where things get a bit… clunky. GamePlus is a hardware-level feature, meaning it’s controlled by buttons on the monitor itself, not through your operating system or game settings. This is both good and bad. Good because it works universally, bad because the menus are often notoriously unintuitive. Imagine trying to change settings on a microwave using only three buttons and a cryptic display; that’s pretty much the GamePlus experience. (See Also: How To Get 144hz On Monitor Laptop )
Most GamePlus monitors have a dedicated button, often located on the underside or rear of the monitor, that brings up the OSD (On-Screen Display). You’ll then need to navigate through various sub-menus. Look for sections labeled ‘Game Style,’ ‘Picture,’ ‘System,’ or sometimes even just a generic ‘GamePlus’ category. The exact naming convention varies wildly between brands and even different models from the same brand. I remember spending at least fifteen minutes on my first GamePlus monitor, a different model entirely, just trying to find the crosshair option. It was buried under ‘Display Mode’ and then hidden within a submenu that required holding down a specific button for three seconds. Utter madness.
The key is patience. Don’t mash buttons. Use the navigation buttons (usually up/down/left/right or a toggle stick) to move through the options. Once you find the ‘Crosshair’ or ‘Reticle’ setting, select it. You’ll typically be presented with a few options: Off, Crosshair (often with sub-options for color and style), or sometimes even a timer or FPS counter.
How to Get Rid of Crosshair on Gameplus Monitor: The Step-by-Step (ish) Process
- Locate the OSD Button: Find the physical button on your monitor that activates the On-Screen Display. This is usually a small button or a joystick on the back, underside, or side bezel.
- Open the OSD Menu: Press the OSD button. If it’s a joystick, you might need to push it in to open the menu.
- Navigate to GamePlus Settings: Use the directional buttons (or joystick) to find a menu option likely labeled ‘GamePlus,’ ‘Game Mode,’ ‘Picture Settings,’ or something similar.
- Find the Crosshair Option: Within the GamePlus menu, look for ‘Crosshair,’ ‘Reticle,’ or ‘Aim Point.’
- Turn It Off: Select the crosshair option and choose ‘Off’ or ‘Disable.’
- Save and Exit: Navigate to the ‘Exit’ or ‘Save & Exit’ option in the OSD menu and confirm your changes.
Sometimes, the crosshair setting might be tied to specific preset ‘Game Modes.’ If you’ve accidentally selected a ‘FPS Mode’ or ‘RTS Mode’ that automatically enables a crosshair, you might need to switch to a ‘Standard’ or ‘User’ mode and then manually disable the crosshair.
What If It’s Still There? Common Glitches and Fixes
So, you’ve followed the steps, navigated the labyrinthine menu, and selected ‘Off.’ Yet, that persistent little digital dot stubbornly remains. Don’t throw your monitor out the window just yet. I’ve encountered this exact scenario, and it’s infuriating. On one particular monitor I owned, after I’d switched off the crosshair via the OSD, it would randomly reappear after a system reboot or even after changing input sources. It was like a digital poltergeist.
Personal Failure Story: I once spent an entire evening trying to disable the crosshair on a brand new monitor. I followed every online guide, every forum suggestion. Nothing worked. I was convinced the monitor was faulty. In a fit of frustration, I unplugged the power cable, waited about 30 seconds, plugged it back in, and then *immediately* powered it on and went straight to the OSD. For some reason, this hard reset cleared the glitch, and the crosshair stayed off. It felt like I’d performed some sort of ancient ritual, and honestly, I still don’t fully understand why it worked, but it did. It was one of those moments where you feel incredibly stupid but also incredibly relieved.
If a full power cycle doesn’t work, try a factory reset of the monitor. This is usually an option within the OSD menu itself, often under a ‘System’ or ‘Reset’ tab. Be warned: this will revert all your custom picture settings, so you’ll have to recalibrate brightness, contrast, color temperature, and so on. Think of it like wiping the slate clean. It’s a bit of a pain, but it often resolves stubborn software glitches within the monitor’s firmware that might be causing the crosshair to persist. (See Also: How To Switch To Monitor Mode Atheros Ar5b97 )
Another thing to check is if the crosshair is tied to a specific ‘Game Mode’ preset that you might have inadvertently activated. Some monitors have presets like ‘FPS Mode’ which might automatically enable a crosshair. If you’re using a mode that forces it, you’ll need to either switch to a different mode and manually disable it, or find a way to customize the ‘FPS Mode’ itself (which some higher-end monitors allow).
Gameplus Crosshairs vs. In-Game Settings: A Comparison
Let’s get this straight: the built-in GamePlus crosshair is a blunt instrument. It’s a one-size-fits-all solution for a problem that most games have already solved with much more nuance. Think of it like trying to season a gourmet meal with a giant salt shaker meant for a cafeteria. You can get the job done, but you sacrifice precision and control.
Unexpected Comparison: Trying to get rid of a persistent GamePlus crosshair is a bit like trying to uninstall bloatware from a new smartphone. Manufacturers love to pre-load apps and features you never asked for, and sometimes they’re so deeply embedded that removing them requires a level of technical know-how that most people don’t possess. The GamePlus crosshair is the monitor equivalent of that annoying weather app that won’t let you delete it, constantly taking up space and occasionally showing you irrelevant information (like a crosshair when you don’t want one).
Most PC games offer extensive crosshair customization. You can change color, size, thickness, opacity, and even choose whether it remains static or becomes dynamic (widens when you move or fire). As reported by many gaming peripheral sites and echoed by general tech advice from institutions like the Consumer Technology Association, these in-game settings are generally preferred for competitive play because they are integrated with the game’s mechanics and can be tailored precisely to your preferences and the game’s visual style. If a GamePlus crosshair is truly causing you to miss shots, it’s almost always better to disable it and use your game’s native options.
| Feature | GamePlus Crosshair | In-Game Crosshair | My Verdict |
|---|---|---|---|
| Customization | Limited (Color, sometimes style) | Extensive (Color, size, shape, dynamic options) | In-game wins, hands down. More control means better aiming. |
| Ubiquity | Works on any input/game | Game-dependent | GamePlus is better if you switch between console and PC often, or play very old titles without options. |
| Visual Clutter | Can obscure targets, fixed placement | Can be customized to be minimal or even disappear when aiming. | GamePlus is often a distraction; in-game can be clean. |
| Ease of Use | Requires monitor OSD navigation | Usually in-game settings menu, easier to access. | In-game is vastly simpler once you’re in the game. |
Frequently Asked Questions About Gameplus Crosshairs
Why Does My Gameplus Crosshair Keep Coming Back?
This is often due to a minor firmware glitch within the monitor. Try performing a full power cycle (unplugging the monitor from power for about 30 seconds and plugging it back in) or a factory reset via the monitor’s OSD menu. Sometimes, specific ‘Game Modes’ can re-enable it automatically, so check if you’re in one of those.
Can I Use the Gameplus Crosshair and My Game’s Crosshair at the Same Time?
Yes, you can, but I strongly advise against it. Having two reticles on screen is incredibly disorienting and usually leads to more misses than hits. It’s like trying to listen to two different songs at once; you just end up with noise. Stick to one or the other. (See Also: How To Take Ar Quiz With Monitor Id )
Is the Gameplus Crosshair Actually Helpful for Aiming?
For some people, especially those playing games with no built-in crosshair options or on older systems, it might offer a slight benefit. However, for the vast majority of PC gamers playing modern titles, it’s a hindrance. The limited customization and fixed nature mean it’s rarely optimized for your specific needs or the game’s visual style.
My Monitor Doesn’t Have a ‘gameplus’ Menu, but I Still See a Crosshair. What Gives?
Some manufacturers use different branding for their built-in overlay features. It might be called ‘SmartImage,’ ‘Gaming Display,’ ‘Reticle,’ or something similar. Look through all the picture and system settings in your monitor’s OSD menu. You might also find that the crosshair is tied to a specific picture preset like ‘FPS Mode.’
How Do I Know If I’m Using a Gameplus Crosshair or an in-Game One?
Check your game’s video or display settings. If you see options to change the crosshair’s color, size, or style within the game itself, that’s your in-game crosshair. If the reticle on screen is always the same regardless of the game you’re playing, and it seems to be overlaid on top of everything, it’s likely a GamePlus or similar hardware feature. You’ll have to use the monitor’s physical buttons to turn it off.
Final Thoughts
So there you have it. Figuring out how to get rid of crosshair on GamePlus monitor can feel like a quest for the Holy Grail sometimes, but it’s usually doable with a bit of persistence and maybe a hard reset or two. The key takeaway is that while these built-in features might seem like a bonus, they’re often more trouble than they’re worth compared to the fine-tuned options you get within your actual games.
Honestly, ditching that fixed digital marker freed up so much mental space for me. I stopped second-guessing where the center of my screen was supposed to be and could actually focus on the game’s environment. It’s a small change, but for me, it made a noticeable difference in my reaction times and overall enjoyment.
If you’re still struggling, don’t be afraid to dig out that monitor manual, even if it feels like ancient hieroglyphics. Sometimes the answer is hidden in plain sight, or requires one of those obscure button combinations that feels like a cheat code in itself.
Recommended For You
